The factory made Norswitch Primary Substations are delivered on site ready equipped and tested. The building includes the MV and LV switchgear, their protection/control relays, DC-system, HVAC- and mechanical design, control panels for the high voltage equipment and main transformers, electrification of the building, AC-equipment etc. The NorSwitch is suitable for one or two main transformers substations.
NorSwitch is tested and commissioned at our factory. It is delivered in transport-size chunks to the site. The necessary installation and commissioning on site is minimised, which speeds up the project schedules.
The factory made Norswitch Transformer Substations are delivered on site ready equipped and tested. The building includes the MV and LV switchgear, their protection/control relays, distribution transformers, HVAC- and mechanical design, electrification of the building, AC-equipment etc. The NorSwitch Transformer Substation is suitable for several distribution transformers, either oil insulated or cast resin insulated. The buildings can be completely or partially thermo-insulated.
The design of the substation starts from the needs of the customer. The substation is designed together taking into consideration the existing network and the needs of the new project, aiming for a cost-effective total solution. The project schedules and responsibilities are agreed before start-up of the project.
NorSwitch Transformer Substation is tested and commissioned at our factory. It is delivered in transport-size chunks to the site. The necessary installation and commissioning on site is minimised, which speeds up the project schedules.
NorSwitch Switching Stations have been designed for remote controlled distribution networks, where it is necessary to control the feeders of the substation from central control room.
NorSwitch Switching Station is tested at the factory and equipped either with motorised air insulated load break switches or circuit breakers., protection relays, lighting panel and indoor lighting. and tested at the factory. It can also be equipped with a remote control system. It is available with either steel or concrete plinth.
Norelco NorSwitch outdoor circuit breaker is designed as a cost effective solution for ground cable networks as a replacement for pole circuit breakers. By combining the Circuit breaker with intelligent relay protection it is possible to achieve an excellent protection level.
The maintenance of the NorSwitch Outdoor Switching Station is much easier and safer than that of any pole circuit breaker. With the help of the intelligent relay, it is locate the source and location of a cable fault. The service frequency is low, since the circuit breaker can be switched on-off 30.000 times with the nominal current. The strong metal enclosure gives a good protection against weather conditions and protects people from any damage that may occur inside the enclosure.
The low voltage control equipment is all placed in a thermo-insulated and cabinet which is equipped with a thermostat controlled heater, so that the NorSwitch Outdoor Circuit Breaker can be used in temperatures as low as -40C.
For the needs of industry and construction it possible to build small substations and electrical rooms into standard freight containers. The transport costs are optimal because they can be transferred as standard freight on the road or on a ship.
Please contact us and tell what your needs are and we will design a suitable container substation together.